3D Geometry dash spider stl file to 3d print, Sphere spidash. ARTICULATED! Scalable

First of all, you got to need super glue for it. And if you are printing everything separately you gotta scale all objects onto 1000%

This is a 3d model printable of the geometry dash's sphere spider, fully articulated, and functional because you can save small items like sd cards, screws, secret notes and more in it.

Also this print can be scaled up a lot, so it can be a piggy bank for example.

The geometry dash's spider vehicle is a variant of the ball/sphere, with it you avoid obstacles teleporting up or down, you will be instantly there.

Important:

If the joints of your print get too sore apply some super glue on the spherical parts of the joints and let it dry, so you get slightly more volume hence more friction.

Creation story:

With this version you can save small objects inside. The idea came because of the spherical form of it and its difficulty to be printed correctly so i had the idea of separating the eye and print it separately so the sphere will be printed with more flat area below, then i thought "¿all that for only that?" so i made it hollow and made the eye a screw. I'm pretty satisfied with the result.

3D PRINTING SETTINGS

super glue needed for post printing

no supports needed!
low infill %
0.24 first layer to guarantee bed adhesion, 0.2 layer height
reduce the first layer's print speed